Switching on the computer and getting a ‘Reboot and Select Proper Boot Device’ error screen, which prevents you from booting up your operating system or doing anything at all, has to be one of the most aggravating things. Even if you repeatedly reboot the computer, the issue persists, frustrating you.
Many users of Windows 10, 8, or 7 get a black screen with an error message that says “reboot and select suitable boot device.” This error message could be caused by a failing or failed hard disc, corrupted system files, or an erroneous PC startup order.
Let’s take a closer look at what might be causing this error number and how to repair it.
What Is Reboot And Choose Proper Boot Device Error?
This problem indicates that the BIOS (basic input/output system) on your computer is unable to locate the boot drive that contains your operating system.
When the device prompts you to restart it, enter the BIOS (UEFI) and select the boot device that contains your operating system, then get the PC to boot up from there. There are a variety of reasons why you might be encountering this error, including both software and physical machine difficulties. Also, read How To Fix If Nintendo Switch Wont Turn On.
What Causes This Error?
There could be a problem with the software. A defective or broken master boot record (MBR), an inactive boot partition, a flawed BIOS boot sequence, lost or corrupted boot data, or a corrupted operating system are all possible causes.
A failed or damaged boot disc, a boot disc that isn’t correctly linked to the PC hardware, a bad connection, a dead hard drive, or a damaged SATA slot are all examples of physical computer problems.
To boot into the BIOS system, you must restart the computer and keep pressing a key. The key to the press might be F2, F8, F10, F12, ESC, or DEL, and it should be displayed on the post screen.
If not, it should be listed in the motherboard handbook that came with your PC. Continue pressing the key until the PC enters the BIOS system, then attempt the remedies below. Also, read How To Fix Twitch Error 2000.
How To Fix Reboot And Select Proper Boot Device Error
Clean The RAM
The reboot and pick proper boot device’ problem could be caused by RAM that hasn’t been removed or cleaned since you bought the computer.
- Unplug the computer and turn it off.
- Remove the screws from the bottom of your PC tower or laptop to access the sideboard and RAM.
- Remove the RAM by carefully unlocking the clamps that keep it in place.
- Clean the dust off the RAM using a soft cloth.
- Reposition it and secure it with a clamp.
- Close the computer and restart it to see if the problem has been resolved.
Check May The BIOS Detects The Boot Drive
- Restart the computer, then press the key that takes you to the BIOS.
- In a list, you’ll see all the devices your BIOS can identify, including as hard disc drives, fans, and other hardware like a DVD/CD drive.
- Shut down the computer if your hard disc drive isn’t in the list.
- Open it up and attach the hard drive to a different SATA slot in the motherboard, or use a different SATA cable to connect the hard drive to a different SATA slot in the motherboard.
- Check to see if the hard disc drive can now be detected by rebooting to the BIOS.
- If this is the case, you know the problem was caused by the motherboard’s SATA slot or your cable.
- If not, you may be dealing with a boot disc that has failed, been damaged, been corrupted, or has died. Also, read How To Fix Steam Disk Write Error.
Check Hard Drive Disk’s Power Cable
Your operating system’s hard disc drive must be powered up and linked to the motherboard via a power cable.
Your PC will not be able to recognize the hard drive if the connection is not correctly attached, frayed, or broken.
1: Turn down your computer, locate the power cable, and inspect it to determine if it is damaged or improperly attached.
2: If everything appears to be in order, delete it and test it on another computer.
Because the error could occur on the other PC, you should replace the power cord – if you don’t have one, reattach it to the first PC and proceed to the next step.
Disable The Legacy Boot
The legacy boot is a feature in some BIOS systems that may create the reboot and pick proper boot device’ issue.
- Restart the computer and enter the BIOS.
- In the BIOS, look for the legacy boot option under settings/tabs.
- If it’s turned off, turn it on; if it’s turned on, turn it off.
- Make a backup of your modifications.
- Restart the computer after exiting the BIOS.
Fix The Windows Boot Files
If the error isn’t caused by the BIOS and you don’t have a physical problem with your hard drive, it might be worth fixing the Windows boot files.
This will check to see whether they’re corrupted and causing the reboot and pick the appropriate boot device’ problem. You’ll need a Windows repair disc or a media installation disc to perform this. Also, read how to unmatch on tinder.
- Place the disc in the CD-Rom drive and start it up.
- To get to the “Windows Recovery Environment,” click “fix your computer” when you see the Windows setup screen.
- After that, you must open a command prompt.
- If you’re using the Legacy BIOS, type the following, pressing Enter after each one:
- If you’re using UEFI, type bcdboot C: windows.
- Restart the computer after exiting the command prompt.
Last Words
If none of the preceding solutions have resolved the reboot and picked the proper boot device’ problem, you can upgrade the SATA drivers in safe mode. Replace the CMOS battery in the motherboard if this does not work. This is the memory system, which could be damaged. Also, read How To Delete Reddit History.
Finally, if none of these repairs have worked and you suspect the hard disc boot drive is broken or the operating system is corrupted, you may need to perform a clean reinstall of Windows.
